5.2.1.2. NXP MC33775A-based 14-Cell Slave v1.0.0

Note

The changelog for this release is found at v1.0.0.

5.2.1.2.1. Overview

Important

The following description only applies for the NXP MC33775A-based 14 cell BMS-Slave hardware version 1.0.0.

Hint

All connector pinouts described below follow the Convention for Molex Micro-Fit 3.0 Connector Pin Numbering.

5.2.1.2.2. Specifications

5.2.1.2.2.1. Electrical Ratings

This section of the documentation is not yet complete.

5.2.1.2.2.2. Mechanical Dimensions

Table 5.50 Mechanical Dimensions

Description

Value

Unit

Width

100

mm

Length

160

mm

Height

15

mm

Weight

88

g

5.2.1.2.2.3. Block Diagram

This section of the documentation is not yet complete.

5.2.1.2.2.4. Schematic and Board Layout

More information about the board schematic and layout files can be found in section Design Resources.

5.2.1.2.3. Functions

5.2.1.2.3.1. Cell Voltage Measurement

This section of the documentation is not yet complete.

5.2.1.2.3.2. Passive Cell Balancing

This section of the documentation is not yet complete.

5.2.1.2.3.3. Global Cell Balancing Feedback

This section of the documentation is not yet complete.

5.2.1.2.3.4. Temperature Sensor Measurement

This section of the documentation is not yet complete.

5.2.1.2.3.5. On-board EEPROM

This section of the documentation is not yet complete.

5.2.1.2.3.6. isoSPI Daisy Chain Connection

The data transmission between the slaves and between the slaves and the basic board takes place using the TPL interface.

This section of the documentation is not yet complete.

5.2.1.2.3.7. Hardware Settings / Options

This section of the documentation is not yet complete.

5.2.1.2.3.7.1. Status LED

This section of the documentation is not yet complete.