![]() |
foxBMS
1.6.0
The foxBMS Battery Management System API Documentation
|
CAN driver Tx callback implementation. More...
#include "bms.h"
#include "can_cbs_tx.h"
#include "can_cfg_tx-message-definitions.h"
#include "can_helper.h"
#include "diag.h"
#include "sys_mon.h"
#include <math.h>
#include <stdint.h>
Go to the source code of this file.
CAN driver Tx callback implementation.
SPDX-License-Identifier: BSD-3-Clause
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:
CAN Tx callback for state messages
Definition in file can_cbs_tx_bms-state-details.c.
#define CANTX_BIT (1u) |
Definition at line 67 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_ALGO_TASK_LENGTH (CANTX_BIT) |
Definition at line 73 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_ALGO_TASK_RECORDED_LENGTH (CANTX_BIT) |
Definition at line 83 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_ALGO_TASK_RECORDED_START_BIT (12u) |
Definition at line 82 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_ALGO_TASK_START_BIT (4u) |
Configuration of the signals
Definition at line 72 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_TASK_LENGTH (CANTX_BIT) |
Definition at line 75 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_TASK_RECORDED_LENGTH (CANTX_BIT) |
Definition at line 85 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_TASK_RECORDED_START_BIT (11u) |
Definition at line 84 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_100MS_TASK_START_BIT (3u) |
Definition at line 74 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_10MS_TASK_LENGTH (CANTX_BIT) |
Definition at line 77 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_10MS_TASK_RECORDED_LENGTH (CANTX_BIT) |
Definition at line 87 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_10MS_TASK_RECORDED_START_BIT (10u) |
Definition at line 86 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_10MS_TASK_START_BIT (2u) |
Definition at line 76 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_1MS_TASK_LENGTH (CANTX_BIT) |
Definition at line 79 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_1MS_TASK_RECORDED_LENGTH (CANTX_BIT) |
Definition at line 89 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_1MS_TASK_RECORDED_START_BIT (9u) |
Definition at line 88 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_1MS_TASK_START_BIT (1u) |
Definition at line 78 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_ENGINE_TASK_LENGTH (CANTX_BIT) |
Definition at line 81 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_ENGINE_TASK_RECORDED_LENGTH (CANTX_BIT) |
Definition at line 91 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_ENGINE_TASK_RECORDED_START_BIT (8u) |
Definition at line 90 of file can_cbs_tx_bms-state-details.c.
#define CANTX_SIGNAL_TIMING_VIOLATION_ENGINE_TASK_START_BIT (0u) |
Definition at line 80 of file can_cbs_tx_bms-state-details.c.